HP MASTERASE HP0-Y51

HP HP0-Y51 certification exam is experiencing a great demand within the IT industry. In recent years, HP HP0-Y51 certificate has become a global standard for many successful IT companies.

Using GetCertKey's HP0-Y51 braindumps materials, passing your HP0-Y51 exam would be easier. GetCertKey's HP HP0-Y51 exam materials contain almost 100% correct answers that are tested and approved by senior IT experts. Our exam materials are written by experienced IT experts. So it has a high hit rate and up to 99.9%. According to what we provide, you can pass HP0-Y51 exam on your first try.

Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

GetCertKey provides the most accurate and latest IT exam materials which almost contain all knowledge points. With the aid of our HP0-Y51 study materials, you don't need to waste your time on reading quite a few reference books and just need spend 20-30 hours to master our HP0-Y51 real questions and answers. And we provide you with PDF Version & Software Version exam questions and answers. For Software Version materials, it is offered to give the candidates simulate the HP0-Y51 exam in a real environment.

After all customers successfully purchased our exam materials, we will provide one year free update. Within a year, if HP0-Y51 exam materials that you have purchased updated, we will free send HP0-Y51 latest version to your mailbox. If you don't pass your HP HP0-Y51 exam, we will give you full refund. You need to send the scanning copy of your HP0-Y51 examination report card to us. After confirming, we will quickly give you FULL REFUND of your purchasing fees.

GetCertKey provide some HP0-Y51 samples of questions and answers. You can try our HP0-Y51 free demo and download it. If you satisfied, you can add HP0-Y51 exam dumps to your shopping cart. After you make a payment, we will send your HP0-Y51 exam dumps to your mailbox. And later you can check your email and download the attachment.

Simple to operation: just two steps to finish your order. (Payment?)

Online HP0-Y51 Test Engine supports Windows / Mac / Android / iOS, etc., because it is the software based on WEB browser.

HP Building HP SDN and FlexNetwork Solutions Sample Questions:

1. Table of Acronyms

An HP Comware switch is configured with the MDC feature. It has three MDCs, which use the same CPU and are assigned these CPU weights:
-MDC 1 = 10 -MDC 2 = 4 -DC 3 = 2
Currently:
-MDC 1 needs to use 25 percent of the CPU resources. -MDC 2 needs to use 60 percent of the CPU resources. -MDC 3 needs to use 60 percent of the CPU resources.
Approximately what percentage of the CPU does each MDC receive while at the current CPU request rates?

A) MDC 1 = 25 percent. MDC 2 = 25 percent, and MDC 3 = 12 percent
B) MDC 1 = 63 percent, MDC 2 = 25 percent, and MDC 3 = 12 percent
C) MDC 1 = 25 percent, MDC 2 = 50 percent, and MDC 3 = 25 percent
D) MDC 1 = 10 percent. MDC 2 = 4 percent, and MDC 3 = 2 percent

2. Refer to the exhibit.

A company has an HP VAN SDN Controller that controls HP Provision switches. An SDN developer creates an application that needs to make many immediate decisions for handling traffic. The application is programmed to create rules such as those shown in the exhibit
Which change could improve performance by letting the hardware handle the flows?

A) Change the idle timeout to 0 and specify table ID 200.
B) In the match criteria, list a specific Ethernet type such as IPv4.
C) Create a service insertion tunnel, and change this rule to output to this tunnel.
D) Explicitly force this rule to use Table 0.

3. Refer to the exhibit.

A company has two HP Unified Wired-Wireless controllers. The MSM APs in Area 1 in the exhibit are controlled by Controller1. The MSM APs in Area 2 in the exhibit are controlled by Controlled. The company purchases a Controlled to provide backup for both Controller1 and Controller2 (N+1 redundancy).
How does the administrator set up the APs in Area 1 so that they contact Controlled if Controller1 fails?

A) Create a backup AC configuration group between Controller1 and Controlled. Enable Fast Backup on the group.
B) Create AP templates for the area 1 APs on Controlled and set its connection priority for these APs to 7.
C) On Controller1, configure the new controller's IP address as the backup controller for the APs
D) Create a roam group that includes Controller1, Controlled, and Controlled. Make sure that Controlled has the highest IP address

4. Refer to the exhibit.

An HP provision switch has OpenFlow table entries indicated in the exhibit.
The switch should forward most traffic between 10.1.10.0/24 and 10.1.20.0/24 on port 1. However any IP traffic between server 1, at 005056-111111 and 10.1.10.10, and server 2, at 005056222222 and 10.20.20, should be forwarded on port 2.
Which change to the rules let the switch behave as desired?

A) For flow 4, the priority is set to 47000
B) For flow 4, the table ID is set to 100, and the priority is set to 47000
C) For flow 3, the instruction is set to Write Actions output 1
D) For flow 3, the table ID is set to 200, and the priority is set to 47000

5. Refer to the exhibit.

The switches shown in the exhibit use the HP VAN SDN Controller as the OpenFlow controller. They connect to the controller on their out-of-band management (OOBM) ports, but these connections are not shown in the exhibit. The switches also run spanning tree protocol. An SDN application installed on the HP VAN SDN Controller is programmed to discover live ports, find redundant paths, and create loopfree paths for traffic infrastructure shown in the exhibit. However the application is not able to complete these functions because the switches are reporting some ports as blocked.
What should the administrator do to let the application create the loopfree paths?

A) Disable spanning tree on the OpenFlow-enabled switches and do not configure link aggregation.
B) Enable spanning tree on the OpenFlow-enabled switches and configure all of the redundant links as egress-only-ports
C) Disable spanning tree on the OpenFlow-enabled switches and configure the redundant links as static link aggregations
D) Enable spanning tree on the OpenFlow-enabled switches but set the application as the spanning tree flood parameter controller.

Solutions: